2GIG-DW40-345: Go!Control Installation Front Door

when installing any 2gig door window sensor first locate the raised guides on one side of the sensor which will need to match up to the raised arrow on the magnet when installed the gap between the raised markings on the sensor and the raised arrow on the magnet should be less than half an…

How Does Crash & Smash Work?

Hi, DIYs. Joe from a Alarm Grid, and today we’re going to talk about crash and smash technology on alarm.com compatible panels. Now we have a bunch of alarm.com panels on the wall. We have the GC3, the GC2, we have some Simon models, and then we have the Qolsys IQ2 right up here. All…

Recommended Wire Gauge for Alarm Sensor Installation

Hey, DIY-ers. This is Bryce from Alarm Grid. And today, we’re going to be learning about which wire gauge sizes to use with wiring an alarm sensor to your panel. There are two wire gauge sizes that we recommend using. It is the 22/4 and the 18/4. Each can be used to wire up different…