Honeywell Lyric Security System – How to Add a Duress Code?

Honeywell Lyric Security System – How to Add a Duress Code?


everybody alarmclub security here and
today we’re going to show you how to add a duress code to the Honeywell Lyric
wireless security and home automation system first I’ll show you how to do it
and then I’ll explain why it’s a good idea and what exactly the dress code is
so for now go and select security tools and during your default master code or
your master code by default it is 1234 which takes you to the master
programming area code and select users highlight duress select Edit verify all
the information in there select the user code this is the code that you want to
have as your dress code and a lot of people like to use 1379 so it’s easy to
remember so I’ll go ahead and use that for now but you can make it anything
that you want 1379 select done verify your information
again select Save now you can back out to the home screen alright now go over what exactly the
dress code is so let’s say your system your alarm system is armed up and you’re
getting ready to walk into your home and an intruder somebody is hiding in the
bushes and they demand you to open the door and disarm your alarm system so
typically you would use let’s say the alarms going off you enter you know 1234 which would disarm the system normally but now let’s say you were under duress
situation and instead of using 1234 you could enter the duress code I showed
you to use which will be 1379 and as you can see it looks like it is disarm the
system and everything is normal but what that has done sent a duress signal
to our central alarm monitoring station where we will immediately dispatched the
authorities because we know you are under duress and in need of help and
that’s really the rundown of how to change the duress code and
what the duress is on the Honeywell Lyric wireless security and home
automation system please make sure to subscribe to our YouTube page and if you
need to reach us by phone or number is 1-844-335-5897

1 Reply to “Honeywell Lyric Security System – How to Add a Duress Code?”

Leave a Reply

Your email address will not be published. Required fields are marked *