Helix Security System – DIY Installation

Helix Security System – DIY Installation


welcome to Resolution products DIY Installation of the Helix wireless encrypted security system. easily installed anyplace in the home
this is chapter one of the helix instructional series outlining the steps
required to install the helix panel everything you need to install the helix
security system comes standard in the box this includes the desktop mounting
stand the ul compliant security system a power supply an Ethernet cable enabling
communications and an instruction manual for a period of time we’re also
including an Animax door window sensor as well please review the manual for
additional details on configuring your system while it’s possible to install
the helix on a wall the recommended installation would use the desktop
bracket you simply insert the helix panel into the base until it rests
securely on the bottom there’s an alignment notch on the backside to
ensure proper placement in the base adding communications uses the ethernet
cable provided plug one end of the cable into the slot on the backside of helix
and the other end into an open port on the home’s router apply power by
plugging the barrel connector into the slot just under the Ethernet cable and
the power supply into an unsweet lit in the home you can secure that using the
outlet cover screw as noted the helix system will emit a long beep
and the LEDs will begin to light up the top five LEDs should turn green with the
top one blinking indicating AC power it may take up to 30 seconds for the
communication LEDs to come solid green make sure to subscribe to our YouTube
page and click the show more tab underneath the video where you can view
valuable links pertaining to this product similar how-to videos and our
low-cost no contract alarm monitoring services

Leave a Reply

Your email address will not be published. Required fields are marked *